Jump to content

thinhnghiem

Members
  • Content Count

    11
  • Joined

  • Last visited

Community Reputation

2 Unknown

Profile Information

  • Gender
    Male
  • Exams
    Nov 2005
  • Country
    Vietnam
  1. thinhnghiem

    How to make my model running permanently

    Dears, I have interesting model here https://www.youtube.com/watch?v=GQUPaHE0vCg I need your opinions to improve it so that it will never stop, and run permanently Thanks
  2. thinhnghiem

    Energy conservation violation

    Hi Vioh, How can you speak Vietnamese? The transformation, as you said, is the internal force inside the system, not the external. I just compare the external input to the output What happens if I can improve my model, so that the rotating can last at least 5 minutes?
  3. thinhnghiem

    Energy conservation violation

    First of all, I would like to say that this model is NOT a perpetual motion. It will stop eventually. What I want to say here is that the output useful work seems to be greater than input energy My system consists of 2 elements. Each element is a cylinder put on an axle. There are two permanent magnets stuck on each cylinder, with their north poles are faced outside. In the youtube clip that I will show you below, you can see the magnets of the first element are painted in blue, while those of the second one are crossed with X. I turn the cylinders slightly so that the north poles of the magnets are faced each other. Then, the thrust between magnets make the cylinders rotate. A single cylinder on an axle itself is not the system. It is an element of the system, which consists of 2 at all. Therefore, the thrust between magnets is not external force which affect system. It is comprehended as internal force between 2 elements of the system. The thrust from the first cylinder makes the second rotate, and the thrust from the second, in its turn, make the first rotate. Each component act as the cause to make the other rotate, and it acquires the affect from the other to rotate. While the input work of the system originates from a small force making cylinders moving short arc, and make magnets facing each other, the output dynamic energy is much higher. You can see in the clip that both cylinders rotate many circles, which create output useful work much greater than the work to make the magnets facing each other. Here is the link of my clip http://www.youtube.com/watch?v=GQUPaHE0vCg&feature=youtu.be Your comments are welcomed to determine that if energy conservation is violated in this case or not Thanks Thinh Nghiem from Vietnam
  4. I have been considering what happens if I make the feedback from out put to input of a ADSL splitter, as well as change input to output and vice versa Below are my steps: Take the first splitter, plug the phone line to the Net output (NOT the input) of itPlug the input of the first splitter to the input of the second splitterPlug the Phone output of the second splitter to the phone output of the first onePlug the Net output of the second splitter to Modem, and connect to laptopSee diagram in my attached screenshot Here I made some abnormal things: Telephone signal transmits into the output, not the input of the splitterTheoutput of second splitter is connected back to the first one Surprisingly, my laptop can access internet normally. Nothing wrong happens Why my extraordinary actions do not affect the operation of the splitters?
  5. As we know, the ADSL splitter box has 1 input and 2 outputs, one for phone signal line, and the other for internet signal line Plug the telecommunication line into the input. Then in the output lines, I make the exchange. I plug the phone line to the internet output, and the internet line to the phone output Then I dial the phone to call to a fax number Surprisingly, I heard the busy tone, instead of fax tone. Note: When I connect in normal way, plug the phone line to the phone output, and internet line to the internet output, this effect does not happen. That means I heard the fax tone as usual
  6. thinhnghiem

    Optical effect by kaleidoscope and LED

    Hi all, A very simple experiment can make us relax with beautiful scene Using a kaleidoscope, and let a LED source to emit light with red color to the back side of the kaleidoscope. You will see many images with very beautiful scene The light make the patterns created by the kaleidoscope turn into red, with blinking effect We can improve with green color LED, or combine both red and green Thinh
  7. thinhnghiem

    Improved non stop engine

    Useful work can be extracted from here, like electric current
  8. thinhnghiem

    Improved non stop engine

    Dears, Few months ago I had chance to post topic here about a non stop engine model. Now it has been improved and works well, and I would like to introduce my new model here. 1. Tools and facilities: - The main component of this model is a wooden toy with dragonfly shape. Its head is a rectangle which is curved upward, with long tail - A sharp pillar - A medium sizes magnet (In attached screenshot it is the round and white piece) - Some tiny magnets 2. Model - Stick the tiny magnets under the tail of dragonfly shaped specimen. The gravity of magnets make this specimen settles down toward the tail. - Then, touch the sharp peak of the rectangle head of the specimen very slightly into the top of the pillar. It makes the balance status of this dragonfly toy is very unstable. It is very easy to drop down as seen in attached screenshot - Put the medium sized magnet vertically and so close to the tail of the specimen so that their facing poles are NOT the same (i.e. north to south or south to north) - Keep the whole system in an insolated room, with all doors and windows are closed to prevent air wing influence. 3. Operation: - The attraction force between 2 magnets makes the tail of the specimen is pulled down slightly, before it is up again. Then a new period starts with the up and down movement of the specimen tail, again and again etc. - The position of the medium sized magnet is adjustable so that it can give best result to the movement of the specimen. If the distance between magnets is so far, the force intensity is so weak to result in movement. Otherwise, the strong attraction force from the medium sized will also prevent the specimen from moving. I let my model there overnight to make sure that there is no stopping. And luckily it does not stop until now. I post my article here so that any interesting individual can follow and replicate my experiments. All of my expectation that you can contact me and replicate my experiment Thinh from Vietnam See my clip in Youtube at https://www.youtube.com/watch?v=Xhu6GunAsJs
  9. thinhnghiem

    Non stop engine

    Hi again, Few months ago I had chance to post topic here about a non stop engine model. Now it has been improved and works well, and I would like to introduce my new model here. 1. Tools and facilities: - The main component of this model is a wooden toy with dragonfly shape. Its head is a rectangle which is curved upward, with long tail - A sharp pillar - A medium sizes magnet (In attached screenshot it is the round and white piece) - Some tiny magnets 2. Model - Stick the tiny magnets under the tail of dragonfly shaped specimen. The gravity of magnets make this specimen settles down toward the tail. - Then, touch the sharp peak of the rectangle head of the specimen very slightly into the top of the pillar. It makes the balance status of this dragonfly toy is very unstable. It is very easy to drop down as seen in attached screenshot - Put the medium sized magnet vertically and so close to the tail of the specimen so that their facing poles are NOT the same (i.e. north to south or south to north) - Keep the whole system in an insolated room, with all doors and windows are closed to prevent air wing influence. 3. Operation: - The attraction force between 2 magnets makes the tail of the specimen is pulled down slightly, before it is up again. Then a new period starts with the up and down movement of the specimen tail, again and again etc. - The position of the medium sized magnet is adjustable so that it can give best result to the movement of the specimen. If the distance between magnets is so far, the force intensity is so weak to result in movement. Otherwise, the strong attraction force from the medium sized will also prevent the specimen from moving. I let my model there overnight to make sure that there is no stopping. And luckily it does not stop until now. I post my article here so that any interesting individual can follow and replicate my experiments. All of my expectation that you can contact me and replicate my experiment Thinh from Vietnam See my clip in Youtube at https://www.youtube.com/watch?v=Xhu6GunAsJs
  10. thinhnghiem

    Non stop engine

    This is my real experiment. And my observation is that it keeps on swinging. That's the reason I posted it here. Maybe my knowledge is not qualified enough to give out explanation. Opinions from others are welcomed
  11. thinhnghiem

    Non stop engine

    Dears, I am investigating a way to make an engine that can run continuously. Currently, my result is so positive. 1. Tools and facilities: - The main component of this model is a wooden toy with dragonfly shape. Its head is a rectangle which is curved upward, with long tail - A sharp pillar - A medium sizes magnet (In attached screenshot it is the round and black piece) - A tiny magnet 2. Model - Stick the tiny magnet under the tail of dragonfly shaped specimen. The gravity of magnet makes this specimen settles down toward the tail. - Then, touch the sharp peak of the rectangle head of the specimen very slightly into the top of the pillar. It makes the balance status of this dragonfly toy is very unstable. It is very easy to drop down as seen in attached screenshot - Put the medium sized magnet at the base of the pillar so that its upward pole is the same as the downward pole of the tiny one (i.e. south to south, or north to north), and they are face to face as shown in attached screenshot - Keep the whole system in an insolated room, with all doors and windows are closed to prevent air wing influence. 3. Operation: - The attraction force between 2 magnets makes the tail of the specimen is pulled down slightly, before it is up again. Then a new period starts with the up and down movement of the specimen tail, again and again etc. - The position of the medium sized magnet is adjustable so that it can give best result to the movement of the specimen. If the distance between magnets is so far, the force intensity is so weak to result in movement. Otherwise, the strong attraction force from the medium sized will also prevent the specimen from moving. I let my model there overnight to make sure that there is no stopping. And luckily it does not stop until now. I post my article here so that any interesting individual can follow and replicate my experiments. All of my expectation that you can contact me and replicate my experiment Thinh from Vietnam
×

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.